Module java.base
Package java.io

Class BufferedInputStream

All Implemented Interfaces:
Closeable, AutoCloseable

public class BufferedInputStream extends FilterInputStream
A BufferedInputStream adds functionality to another input stream-namely, the ability to buffer the input and to support the mark and reset methods. When the BufferedInputStream is created, an internal buffer array is created. As bytes from the stream are read or skipped, the internal buffer is refilled as necessary from the contained input stream, many bytes at a time. The mark operation remembers a point in the input stream and the reset operation causes all the bytes read since the most recent mark operation to be reread before new bytes are taken from the contained input stream.
Since:
1.0
  • Field Summary

    Fields
    Modifier and Type
    Field
    Description
    protected byte[]
    The internal buffer array where the data is stored.
    protected int
    The index one greater than the index of the last valid byte in the buffer.
    protected int
    The maximum read ahead allowed after a call to the mark method before subsequent calls to the reset method fail.
    protected int
    The value of the pos field at the time the last mark method was called.
    protected int
    The current position in the buffer.

    Fields declared in class java.io.FilterInputStream

    in
  • Constructor Summary

    Constructors
    Constructor
    Description
    Creates a BufferedInputStream and saves its argument, the input stream in, for later use.
    Creates a BufferedInputStream with the specified buffer size, and saves its argument, the input stream in, for later use.
  • Method Summary

    Modifier and Type
    Method
    Description
    int
    Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream.
    void
    Closes this input stream and releases any system resources associated with the stream.
    void
    mark(int readlimit)
    See the general contract of the mark method of InputStream.
    boolean
    Tests if this input stream supports the mark and reset methods.
    int
    See the general contract of the read method of InputStream.
    int
    read(byte[] b, int off, int len)
    Reads bytes from this byte-input stream into the specified byte array, starting at the given offset.
    void
    See the general contract of the reset method of InputStream.
    long
    skip(long n)
    See the general contract of the skip method of InputStream.

    Methods declared in class java.io.FilterInputStream

    read

    Methods declared in class java.lang.Object

    clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
  • Field Details

    • buf

      protected volatile byte[] buf
      The internal buffer array where the data is stored. When necessary, it may be replaced by another array of a different size.
    • count

      protected int count
      The index one greater than the index of the last valid byte in the buffer. This value is always in the range 0 through buf.length; elements buf[0] through buf[count-1] contain buffered input data obtained from the underlying input stream.
    • pos

      protected int pos
      The current position in the buffer. This is the index of the next byte to be read from the buf array.

      This value is always in the range 0 through count. If it is less than count, then buf[pos] is the next byte to be supplied as input; if it is equal to count, then the next read or skip operation will require more bytes to be read from the contained input stream.

      See Also:
    • markpos

      protected int markpos
      The value of the pos field at the time the last mark method was called.

      This value is always in the range -1 through pos. If there is no marked position in the input stream, this field is -1. If there is a marked position in the input stream, then buf[markpos] is the first byte to be supplied as input after a reset operation. If markpos is not -1, then all bytes from positions buf[markpos] through buf[pos-1] must remain in the buffer array (though they may be moved to another place in the buffer array, with suitable adjustments to the values of count, pos, and markpos); they may not be discarded unless and until the difference between pos and markpos exceeds marklimit.

      See Also:
    • marklimit

      protected int marklimit
      The maximum read ahead allowed after a call to the mark method before subsequent calls to the reset method fail. Whenever the difference between pos and markpos exceeds marklimit, then the mark may be dropped by setting markpos to -1.
      See Also:
  • Constructor Details

    • BufferedInputStream

      public BufferedInputStream(InputStream in)
      Creates a BufferedInputStream and saves its argument, the input stream in, for later use. An internal buffer array is created and stored in buf.
      Parameters:
      in - the underlying input stream.
    • BufferedInputStream

      public BufferedInputStream(InputStream in, int size)
      Creates a BufferedInputStream with the specified buffer size, and saves its argument, the input stream in, for later use. An internal buffer array of length size is created and stored in buf.
      Parameters:
      in - the underlying input stream.
      size - the buffer size.
      Throws:
      IllegalArgumentException - if size <= 0.
  • Method Details

    • read

      public int read() throws IOException
      See the general contract of the read method of InputStream.
      Overrides:
      read in class FilterInputStream
      Returns:
      the next byte of data, or -1 if the end of the stream is reached.
      Throws:
      IOException - if this input stream has been closed by invoking its close() method, or an I/O error occurs.
      See Also:
    • read

      public int read(byte[] b, int off, int len) throws IOException
      Reads bytes from this byte-input stream into the specified byte array, starting at the given offset.

      This method implements the general contract of the corresponding read method of the InputStream class. As an additional convenience, it attempts to read as many bytes as possible by repeatedly invoking the read method of the underlying stream. This iterated read continues until one of the following conditions becomes true:

      • The specified number of bytes have been read,
      • The read method of the underlying stream returns -1, indicating end-of-file, or
      • The available method of the underlying stream returns zero, indicating that further input requests would block.
      If the first read on the underlying stream returns -1 to indicate end-of-file then this method returns -1. Otherwise, this method returns the number of bytes actually read.

      Subclasses of this class are encouraged, but not required, to attempt to read as many bytes as possible in the same fashion.

      Overrides:
      read in class FilterInputStream
      Parameters:
      b - destination buffer.
      off - offset at which to start storing bytes.
      len - maximum number of bytes to read.
      Returns:
      the number of bytes read, or -1 if the end of the stream has been reached.
      Throws:
      IOException - if this input stream has been closed by invoking its close() method, or an I/O error occurs.
      IndexOutOfBoundsException - If off is negative, len is negative, or len is greater than b.length - off
      See Also:
    • skip

      public long skip(long n) throws IOException
      See the general contract of the skip method of InputStream.
      Overrides:
      skip in class FilterInputStream
      Parameters:
      n - the number of bytes to be skipped.
      Returns:
      the actual number of bytes skipped.
      Throws:
      IOException - if this input stream has been closed by invoking its close() method, in.skip(n) throws an IOException, or an I/O error occurs.
      See Also:
    • available

      public int available() throws IOException
      Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream. The next invocation might be the same thread or another thread. A single read or skip of this many bytes will not block, but may read or skip fewer bytes.

      This method returns the sum of the number of bytes remaining to be read in the buffer (count - pos) and the result of calling the in.available().

      Overrides:
      available in class FilterInputStream
      Returns:
      an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking.
      Throws:
      IOException - if this input stream has been closed by invoking its close() method, or an I/O error occurs.
    • mark

      public void mark(int readlimit)
      See the general contract of the mark method of InputStream.
      Overrides:
      mark in class FilterInputStream
      Parameters:
      readlimit - the maximum limit of bytes that can be read before the mark position becomes invalid.
      See Also:
    • reset

      public void reset() throws IOException
      See the general contract of the reset method of InputStream.

      If markpos is -1 (no mark has been set or the mark has been invalidated), an IOException is thrown. Otherwise, pos is set equal to markpos.

      Overrides:
      reset in class FilterInputStream
      Throws:
      IOException - if this stream has not been marked or, if the mark has been invalidated, or the stream has been closed by invoking its close() method, or an I/O error occurs.
      See Also:
    • markSupported

      public boolean markSupported()
      Tests if this input stream supports the mark and reset methods. The markSupported method of BufferedInputStream returns true.
      Overrides:
      markSupported in class FilterInputStream
      Returns:
      a boolean indicating if this stream type supports the mark and reset methods.
      See Also:
    • close

      public void close() throws IOException
      Closes this input stream and releases any system resources associated with the stream. Once the stream has been closed, further read(), available(), reset(), or skip() invocations will throw an IOException. Closing a previously closed stream has no effect.
      Specified by:
      close in interface AutoCloseable
      Specified by:
      close in interface Closeable
      Overrides:
      close in class FilterInputStream
      Throws:
      IOException - if an I/O error occurs.
      See Also: